Channel: OUT OF DARTS

Category: Entertainment

Tags: nerf moddersnerf modhasbro3d nerfxshotnerf moddingoodnerf gun3d printed nerfnerf modding partsadventure forceblasters3d printingdart zonenerf modsout of dartsnerf mod shopoutofdartsnerf blasternerfrival

Description: We just can't leave well enough alone! The Dart Zone Pro Mark-III was built for this hobby, with 16-gauge wire, an XT-60 behind the battery tray, and plenty of room in the shell for upgrades. It's a pretty decent flywheeler by itself, but how much further can we push it? With three Krakens, Daybreak flywheels, and a custom OOD Pro Cage, you can take an already competition-level blaster a step (or two) higher -- and even swap in different cages to tune your performance. At above 150 FPS and 16-17 Darts-per-Second on 3S, this thing makes me giggle pulling the trigger. Want to get started? Linked below is our Mod Kit, with all the supplies you need to mod your blaster to the next level: outofdarts.com/products/dartzone-pro-mk3-mod-kit-170fps All other compatible products and 3D printed designs for the Mk-3 can be found here: outofdarts.com/collections/dartzone-pro-mk3 Want more details on how to wire an XT-60 connector? Check out our earlier video here: youtu.be/0Gy_O6dRtKA FAQ, Updates, & Corrections: -If you have any questions about products we sell on the shop, don't hesitate to shoot us an email: orders@outofdarts.com -FoamBlast Talon Fix: Check back soon for updates! -Pusher Arm Update: So far ours hasn't broken (despite our best efforts), but in case anyone's pusher arm has, we will have a stronger 3D-Printed replacement available on the shop soon. -Pusher Board PTCs: Check back soon for updates! -Pusher Return Spring: Check back soon for updates! 0:00 Opening 0:33 Supplies to Source 2:45 Tools Required 3:27 Disassembling the Blaster 5:38 OPTIONAL - Talon Mag Fixes 9:20 OPTIONAL - Pusher Motor Upgrade 15:49 Some Challenges with the Full Auto Upgrade 18:05 Wiring the XT-60 Connector 19:08 Re-Mounting the Pusher Assembly 21:16 OPTIONAL - Lubricating Internal Parts 21:58 Testing the Rate of Fire 22:19 Assembling the Flywheel Cage 24:59 Wiring the Flywheel Cage 26:30 OPTIONAL - Rewiring & Installing the Stock Flywheel Cage 28:42 Installing the Flywheel Cage 29:35 Partially Assembled Firing Demo 29:51 Reassembling the Blaster 30:19 Installing a LiPo 30:53 Fully-Assembled Firing Demos 31:15 Performance & Closing Remarks 31:58 Range & Accuracy Test Out of Darts, run by Luke, is a one-stop nerf-modding hobby shop. We carry all the supplies, tool accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 Prusa printers. Check out our site below for guides, build lists, and resources. Please subscribe for more! tinyurl.com/jnuot5d My web store: outofdarts.com Product questions? orders@outofdarts.com Follow me on Instagram for sneak peeks: instagram.com/outofdarts Edited by J Perry Heun, Out of Darts Video Editor